Laminex Diamondgloss should be fully supported by substrate when glued. Do not bond directly to plaster, plasterboard or concrete.The particleboard or medium density fibreboard should be uniform along the full length of the board with none of the following faults:

1. High spots 2. Bumps 3. Low spots 4. Ridges 5. No surface dust or chips.

Laminex DiamondGloss is a high gloss laminate with mark and scuff resistance superior to traditional laminates.

Laminex DiamondGloss grade is supplied with a Polyester protective film which provides a protective layer to the high gloss surface for transport and handling.

Contact glue is generally not recommended for high gloss surfaces; mainly due to visual appearance of the finished laminate, which has a tendency to amplify unevenness of the glue line.The expectation of appearance and decision of acceptability is that of the customers not of The Laminex Group or Pageant Sales or Pageant Building Products or Pageant Laminates. More uniform results may be achieved using spray application.